All products:open close

The MCDE3000 is an Ethernet camera suitable for mobile use. It can be utilised in networks compliant with IEEE 802.3 (LAN). Fitted with intelligent Image processing and dynamic overlays, it functions as a smart sensor in a variety of applications. For example, it can be integrated into existing video monitoring systems or used for video Streaming across large distances. The MCDE3000 meets the AEF requirements for future digital camera interfaces.

MCDE3000 – OEM-Ethernet camera

 

Product characteristics at a glance

  • Integrated, FPGA based video processing unit
    for customised functions as:
    - Image processing
    - Feature tracking, active overlays possible
    - Inspection and measurement of objects
    - Reading of coded information (QR, OCR)
    - Binary image processing
    - Augmented reality
  • Fully digital image/video transmission (30 fps)
  • Video output Motion JPEG
  • Configureable video resolution, compression
    rate and frame rate
  • Optional with LED/IR lighting
  • Voltage supply via PoE
    Software updates make the unit future proof
  • Quality “Made in Germany”

There are no visibility issues the MC3000B with its anodised and coated aluminium housing cannot handle in robust, heavy duty applications and under extreme weather and environmental conditions. Ist numerous available view angles and plug connections make it the perfect choice for a wide range of applications in utility vehicles and mobile machinery. The MC3000B‘s mechanical and electric layout is ideally suited for rough conditions in heavy duty applications, and the device is pressure washer-proof in accordance with IP69K to guarantee a log service life and reliability. The energy-efficient automotive CMOS sensor delivers excellent image quality even in diffi cult lighting conditions. The automatically controlled screen heater ensures perfect visibility at low temperatures – quality “Made in Germany“.

MC3000B - Heavy-duty camera

 

Product characteristics at a glance

  • Suitable for heavy duty applications

  • Immersion and jet cleaning-proof (IP68 and IP69K)

  • Operating and storage temperature -60°C…+85°C

  • 2.5 W screen heater

  • Automotive CMOS sensor

  • 70°, 90°, 100° and 115° horizontal view angle (other view angles on request)

  • On-board network integration capability,
    9 V…32 V DC

  • Made in Germany

The MC3000B-VA camera is a heavy duty camera made of VA steel, and therefore unique in the Motec camera series. Its rust-proof stainless steel alloy housing is ideally suited for applications in extreme weather and environmental conditions, as well as for special requirements in terms of hygiene. The housing is pressure washer-proof and IP69K-tested; the camera can withstand impacts up to 50 g and oscillations up to 30 g. The energy-efficient automotive CMOS sensor delivers an excellent image Quality in operating temperatures between -40°C and +85°C. The integrated, automatically controlled 2.5 Watt screen heater ensures perfect visibility at temperatures below 5°C.

MC3000B-VA - Heavy duty stainless steel-camera

 

Product characteristics at a glance

  • Suitable for heavy duty applications

  • Robust, rust-proof stainless steel housing

  • Immersion and jet cleaning-proof (IP68 and IP69K)

  • Operating and storage temperature -40°C…+85°C

  • 2.5 W screen heater

  • Automotive CMOS sensor

  • 90°or 100° horizontal view angle (other view angles on request)

  • On-board network integration capability,
    9 V…32 V DC

  • Made in Germany

The MC4000A is a heavy-duty camera with excellent electromagnetic compatibility (EMC). Its development was based on the strict requirements for industry and defence. The mechanical and electrical design resists high levels of strain with respect to shock, vibration, dust and moisture.

MC4000A – Heavy-duty camera

 

Product characteristics at a glance

  • SD resolution
  • Video output format - analog 1Vss
  • Scratch-proof front screen (MIL - STD - 810G
  • Method 510 G Procedure II, blowing sand test)
  • Programmable overlays
  • Future-proof due to software updates
  • Quality "Made in Germany"

The MC4000A-IR is a robust, night vision-compatible heavy-duty infrared camera with high electromagnetic compatibility (EMC). Its development was based on the strict requirements for industry and defence. The mechanical and electrical design resists high levels of strain with respect to shock, vibration, dust and moisture.

MC4000A-IR – Night vision-compatible heavy-duty infrared camera

 

Product characteristics at a glance

  • Infrared lighting with a wavelength of 940 nm
  • Special screen heating for clear view, melts ice up to 3 mm thick
  • SD resolution
  • Video output format analog 1Vss
  • Scratch-proof front screen (MIL - STD - 810G Method 510 G Procedure II, blowing sand test)
  • Programmable overlays
  • Future-proof due to software updates
  • Quality "Made in Germany"

The MC4000A-WL is a robust heavy-duty camera with a built-in white light and excellent electromagnetic compatibility (EMC). Its development was based on the strict requirements for industry and defence. The mechanical and electrical design resists high levels of strain with respect to shock, vibration, dust and moisture.

MC4000A-WL – Heavy-duty camera with built-in light

 

Product characteristics at a glance

  • White light with a 120° beam angle
  • Special screen heating for clear view, melts ice up to 3 mm thick
  • SD resolution
  • Video output format analog 1Vss
  • Scratch-proof front screen (MIL - STD - 810G Method 510 G Procedure II, blowing sand test)
  • Programmable overlays
  • Future-proof due to software updates
  • Quality "Made in Germany"

The MC5200 was developed specially for monitoring crane loads. Modern video modulation technology provides sharp, high-contrast images and allows up to 26x zoom. The Motec System Bus (MSB) allows the crane driver to operate the camera.

MC5200 – Motor zoom camera

 

Product characteristics at a glance

  • Sturdy aluminium casing
  • Sharp image with full contrast
  • Up to 26x optical zoom:
  • Horizontal view angle from 1.6° to 47.5° degrees
  • Built-in screen heating

 

The MC6000D camera was developed specifically for heavy duty applications. The robust design and special surface treatment makes it the perfect choice for use in extreme weather conditions. This camera is impervious to shock impacts up to 50 g and vibrations up to 30 g. The energy-efficient automotive CMOS sensor delivers an excellent image quality in operating temperatures between -40°C and +85°C. An integrated, automatically controlled 2.5 Watt screen heater ensures perfect visibility at temperatures below +5°C.

MC6000D - Sturdy universal camera

 

Product characteristics at a glance

  • Suitable for heavy duty applications

  • Immersion and jet cleaning-proof (IP68 and IP69K)

  • Operating and storage temperature -40°C…+85°C

  • Thermally tempered, distortion-free glass

  • 2.5 W screen heater

  • Automotive CMOS sensor

  • 90° or 70° horizontal view angle

  • On-board network integration capability, 9 V…32 V DC

  • Made in Germany
MC7000P - Sturdy heavy-duty camera

 

Product characteristics at a glance

  • Universal camera with sturdy plastic casing
  • Modern imaging electronics (CMOS chip)
  • Quickly adjusts to changing light conditions
  • Sharp images even with back-light
  • Optional stainless steel support

 

MC7000P-E - Sturdy heavy-duty camera

 

Product characteristics at a glance

  • Universal camera with sturdy stainless stell casing
  • Modern imaging electronics (CMOS chip)
  • Quickly adjusts to changing light conditions
  • Sharp images even with back-light
  • Optional stainless steel support

 

The MC7180N wide angle camera is the perfect choice for heavy duty 270°/360° surround vision systems. The 180° view angle and compact design allow an easy adaptation of the device to various vehicle types and visibility issues. The pressure washer proof MC7180N can also be used as a standalone device for heavy duty applications. It easily withstands shock impacts up to 50 g and oscillations up to 5 g. The energy-efficient automotive CMOS sensor delivers an excellent Image quality in operating temperatures between -40°C and +85°C.

MC7180N - Wide angle camera

 

Product characteristics at a glance

  • Pressure washer-proof (IP69K)

  • Operating and storage temperature -40°C…+85°C

  • CMOS 1/3“ image sensor with sensor resolution horizontal 800 x 672 (RGB) x vertical 492 pixels

  • 180° horizontal view angle

The thermal imaging camera produces clear images even into pitch darkness or thick smoke. The driver can see up to 5 times further than with conventional headlights and can recognise people, animals or objects earlier. Motec has the exclusive German distribution rights for the PathFindR made by US manufacturer Flir.

PathFindIR II - Thermal imaging camera

 

Product characteristics at a glance

  • Sturdy, waterproof casing
  • No light sources required
  • Sharp images in darkness, fog, rain and snow
  • Wide angle lens 19 mm
  • Built-in heater element
  • Compatible with virtually all displays

 

Do you have any questions about our products? Please consult your contact.

Our quality solutions are tailored on an accurate, modular basis to your requirements and the specifications of your vehicle and machinery types.

Certified quality

Top quality at every level Motec is certified in accordance with ISO 9001 and ISO14001 and carries the AEO certificate as an Approved Economic Operator.

 
Product catalog

Product catalog

Reliable components – intelligent system solutions

 
Want to know more?

Want to know more?

You can find the right contacts here.