All solutions open close

Cameras - one for each side of the rails - monitor the grinding and milling of the ride surfaces. The operator can see the grinding heads and their level of wear. This means he can control their use and replacement intervals accurately. The systems are tailored to the respective requirements.

 

The benefits for you

  • Watching people in front of and behind the machine
  • Checking the grinding heads, rails and extraction systems
  • Monitoring the grinding and milling of rails
  • Checking the status and wear level of grinding stones
Christian Schaefer

Christian Schaefer

Phone: +49 6433 9145-9518
E-Mail to: Christian Schaefer
 

Cameras make it easier to monitor the cleaning units. The operator has an overview of the suction device. Problems and blockages can be detected early and remedied. Additional cameras in front of and behind the machine provide increased safety during travel and shunting.

The benefits for you

  • Monitoring people and objects in front of and behind the machine.
  • Monitoring working areas
  • Checking the cleaning unit
Klaus Schlitt

Klaus Schlitt

Phone: +49 (0) 6433  91 45 - 95 20
E-Mail to: Klaus Schlitt
 

Systems with six or more cameras ensure safe and efficient working processes. The cameras are directed at the carriages and the ballast containers underneath the machines. This means the operator has the compression process in the bed between the rails under control at all times.

 

The benefits for you

  • Watching people in front of and behind the machine
  • Checking the tamping picks and the carriages
  • Monitoring of the tamping process/ compression process in the ballast bed
Klaus Schlitt

Klaus Schlitt

Phone: +49 (0) 6433  91 45 - 95 20
E-Mail to: Klaus Schlitt
 

Camera systems are mandatory on rail machines. A camera mounted to the carriage records the area behind the digger (rail axle) almost completely. Rerailing and coupling processes can be performed more quickly and safely by the driver.

 

 

The benefits for you

  • Monitoring people/objects in front of and behind the machine
  • Checking rerailing and coupling procedures
  • Monitoring interruptions in travel route (e.g. if rails are dismantled)
Christian Schaefer

Christian Schaefer

Phone: +49 6433 9145-9518
E-Mail to: Christian Schaefer
 

Cameras - one for each side of the rails - monitor the milling of travel surfaces. The operator can see the milling heads and their level of wear. This means he can control their use and replacement intervals accurately. The systems are tailored to the respective requirements.

The benefits for you

  • Monitoring people/objects beside and behind the machine
  • Checking the milling tool, the rails and the extraction systems
  • Monitoring milling of the rails
  • Checking status and level of wear of milling tool
Christian Schaefer

Christian Schaefer

Phone: +49 6433 9145-9518
E-Mail to: Christian Schaefer
 
Rail vehicle catalogue

Rail vehicle catalogue

Overview of systems, components and example applications for rail vehicles