All products:open close

The MVCD1000 is a digital, intelligent, FPGA-SoC-based Ethernet and CAN bus capable heavy-duty multi camera video control unit that processes up to 4 camera images in a parallel mode. It can consolidate sensory data and display it via a monitor output or via an Ethernet video stream.

MVCD1000 – Heavy Duty Video Control Unit

 

Product characteristics at a glance

  • On-board electronics integration via bi-directional control cable, CAN interface, and Ethernet connection available

  • Additional active sensors, e.g. radar and ultrasound can be optionally implemented (sensorfusion available soon)

  • Altera FPGA (SoC) with 925 MHz dual-core

  • ARM Cortex-A9 MPCore processor, 1GB RAM, 4 GB Flash (upgradeable), functionally scalable via the Motec-embedded Linux OS

  • Video input for up to 4 cameras (PAL/NTSC)

  • Video output via analogue monitor output (FBAS) and video streaming via Ethernet connection (available soon)

  • Future-proof due to continuous software updates

 

Logo of the Federal Ministry for Economic Affairs and Energy

The video control unit MB1405-Quad allows the display of up to 4 camera images simultaneously in what is referred to as quad split mode. The supplied remote control is used to switch between the different camera images.

MB1405-Quad – with split function

 

Product characteristics at a glance

  • Simple control for up to 4 cameras
  • Split function – up to 4 images at once
  • Camera selected via control cables or control unit
  • Power supply for cameras and monitor
  • Mirror function for each camera

 

The MVCU1300 is an intelligent, CAN-controlled heavy-duty video control unit. It combines video and sensor data (max. 12 sensors, e.g. ultrasound to measure distance) and can display this information on up to 2 monitors.

MVCU1300

 

Product characteristics at a glance

  • Connection of up to 12 analogue or digital single-wire sensors

  • Connection of up to 10 sensors to CAN bus (basically, all CAN-capable sensors are possible)

  • Connection of one LASER (I/O) per control lead

  • Control via CAN bus (MSB 2.0) and/or 4 control leads

  • Transmission of imported sensor data per CAN data bus (MSB 2.0), native, combined or merged

  • MVCU1300 is used as power supply unit for heavy-duty camera, for both monitors and the connected sensors. Additional power supply not required

The MVCU1400 is an intelligent, CAN-controlled heavy-duty multi camera video control unit. It can process up to 4 camera images and display these images on up to 2 monitors in a variety of modes.

MVCU1400

 

Product characteristics at a glance

  • Connection of up to 4 compact cameras or 3 compact cameras and one motor zoom camera

  • Control via CAN bus (MSB 2.0), one Monitor toggle wire and/or 4 control wires and one additional control wire which provides the Option to evaluate the PWM signal (individual confi guration of the 4 control wires and the Monitor toggle wires)

  • Main monitor output as Single, Split, Triple, PiP (randomly confi gurable), Quad and OSD in 4 colours

  • Safety function if permissible operating temperature is exceeded (power supply for all connected components is shut down)

The MVCU1500 is an intelligent, CAN-controlled heavy-duty multi camera video control unit. It can process up to 8 camera images and display these images on up to 2 monitors in a variety of modes.

MVCU1500

 

Product characteristics at a glance

  • Connection of up to 6 compact cameras and 2 motor zoom cameras
  • Control via CAN bus (MSB 2.0), 2 Monitor toggle wires and/or 8 control wires (individual configuration of control wires and the Monitor toggle wires)
  • Monitor output as Single, Split, Triple, PiP (randomly confi gurable), Quad and OSD in 4 colours
  • Safety function if permissible operating temperature is exceeded (power supply for all connected components is shut down)

 

The MVCU1600 is an intelligent, CAN-controlled heavy-duty multi camera video control unit that can process up to 8 camera images and display them on up to 5 monitors in various modes and with individual overlays.

MVCU1600

 

Product characteristics at a glance

  • Connection of up to 8 heavy-duty cameras
  • Display on up to 5 monitors
  • Monitor output with flexible display options
  • Alternatively, bit maps (symbols, logos, images, etc.) can be displayed

The MB1205 is a video control unit for 2 cameras mounted on tractor vehicles. The functions of the MB1205, e.g. automatic switching of camera images for articulated trucks, cycle signals to activate the camera change-over, adjustable image mirroring for each camera, and third-party installations, are the outstanding features of the video control unit.

MB1205 – for two cameras

 

Product characteristics at a glance

  • Simple control for up to 2 cameras
  • 12 or 24V DC power supply
  • Mirror function for each camera
  • Supports flash-controlled side camera
  • Automatic trailer detection for semi-trailer trucks

 

The MBE5200 operator control unit makes it easy to manipulate all functions of the MC5200 motor zoom camera with a single device. Furthermore, the control module offers the opportunity to expand the system for the connection of an additional camera with a prime lens.

MBE5200 – for cranes

 

Product characteristics at a glance

  • Digital control of camera and wireless system
  • Compact camera via second input
  • Functions can be controlled via external signals
  • Option of connecting a second monitor

 

Do you have any questions about our products? Please consult your contact.

Our quality solutions are tailored on an accurate, modular basis to your requirements and the specifications of your vehicle and machinery types.

 

Certified quality

Top quality at every level Motec is certified in accordance with ISO 9001 and ISO14001 and carries the AEO certificate as an Approved Economic Operator.

 
Product catalog

Product catalog

Reliable components – intelligent system solutions

 
Want to know more?

Want to know more?

You can find the right contacts here.